How to Apply the Kennel Kit
How Is the Kennel Kit Applied?
The Concrete Remedy Kennel Solution is a simple three step process to completely take care of the concrete floors and runs of your kennel. Complete, easy to follow instructions are sent with each order. Plus you can email or call me at any time for help.
Use the Kennel Kit on all concrete both inside and outside.
Anyone Can Apply It
How easy is it to apply? All the feedback from our kennel owner customers is that the process was simple and straight-forward.
One kennel owner told us: "I also was impressed with how easy it was to treat the concrete floor. I am in my late 20's, don't really like to do construction type work but to my surprise, I treated every inch of the concrete by myself. The directions were detailed and it was so easy to apply."
Another kennel owner told us: "If I can do it, anybody can!"
Step 1: Clean It
The first step is to thoroughly clean and disinfect the concrete. This can be done with a garden hose and your choice of cleaner and disinfectant. Be sure to thoroughly rinse off the concrete. You don't need to wait for the concrete to dry before moving on to Step 2.
Remember, Fortress Deep Seal is a deep penetrating sealant and has to be able to soak into the concrete floor of your kennel.
It is important to test your kennel floor to ensure that Fortress Deep Seal will work to its full potential.
To test, simply splash a little water on it to see if it soaks in. If it does, then Concrete Remedy DS will too and you can take advantage of all of its benefits. (Note: power-troweled concrete, like a smooth garage floor, will take longer to soak in but it will soak in.) If previous waterproofers or paint prevent the penetration of Fortress Deep Seal, the old material must be removed prior to applying.
Step 2: Apply Fortress Deep Seal
Now it's time to stabilize the concrete and fill the internal microscopic pores of the concrete with Concrete Remedy DS. It can be brushed, rolled, sprayed or even poured on. Concrete Remedy DS is permanent, so you'll never have to apply another coat to the slab. When it comes into contact with the alkali in the concrete it forms an aero gel that moves deep into the concrete via capillary action. When this gel dries, it sets up hard like glass inside the concrete.
Step 3: Apply Shield Top Seal
Be sure to wait until the concrete is thoroughly dry. Do not apply while the concrete is still wet.
Once dry, it's time to seal the surface layer of the concrete with Shield Top Seal. Apply it the same way the Fortress Deep Seal was applied.
Once it's dry, your dog will be protected from bacteria, mold and mildew growth and his home will be much easier to keep clean.